High Quality Dental Equipment At An Affordable Price!

Clio Dental Sensor w/ DI Technology

$7,495.00$8,995.00 $5,495.00$6,995.00

DI Technology – Directly Integrate Clio Sensors with Dexis, Eaglesoft & VixWin.
Image Quality – If you’re not getting a diagnostic radiograph, then what’s the point?
Comfort – When the patient is more comfortable, you’ll capture the radiograph you’re looking for.
Ergonomics – The operatory is hectic enough. So the easier, the better.
Durability – You just want it to work.

For more Details on the Clio Dental Sensors. Please give our office a call at (800) 869-0915

Clear selection

Why Clio Dental Sensors?

For the first time ever, dental practices can now seamlessly integrate Clio Digital X-ray Sensors into existing software without any 3rd party bridges or twain drivers.

Currently, if offices use software such as Dexis, Eaglesoft or VixWin, only proprietary sensors can be purchased to utilize the full capabilities of each software. If a dentist chooses to purchase another company’s sensors, integration would only work with 3rd party bridges or a twain driver.

Such bridges complicate diagnosis procedures, increase staff training and disables auto-acquisition on some software. They also require you to unplug other sensors and/or switch the acquisition device, while diminishing image quality.

With DI technology, you can now use the Clio sensors just like your existing hardware with superior image quality at a better value.

Available for Dexis 9 & 10, Eaglesoft, Vixwin Platinum, Apteryx, and many others.

Call (800) 869-0915 for more details.

Benefits of DI Technology

  • Captures x-rays images WITHOUT TWAIN or 3rd party bridging. Other sensors require a bridge that can be confusing and add extra steps to take x-ray images.
  • Cuts the hassle out of other complicated integration
  • Uses the full capabilities of your existing software including auto-acquisition
  • Captures high quality images at a more affordable cost.
  • Does not change existing settings or current workflow

Image Quality

  • Spatial Resolution – Can you see the tip of your #6 file? With 20 line pair/mm measured resolution (26.3 lp/mm theoretical), the answer will be obvious.
  • Signal To Noise Ratio – Can you see Lincoln’s facial features? This demonstrates the ability to detect density variations of less than 2%, so you can see the subtlest of dental lesions.
  • Maximum Mesial Coverage – Wishing for an easier time capturing that canine-premolar contact? 2mm less of mesial dead space empowers your auxiliaries.
  • Technology – Don’t want yesterday’s technology? We start with a CMOS chip and pixels 19 microns in size. Next is the fiber optic plate which cleans up the image by preventing extraneous X-ray photon collection. And finally, optically coupled at sub-micron tolerances, is the columnar Cesium Iodide scintillation layer.


  • Rounded Corners – The sensor should be contoured to the mouth, not vice versa. With a 6mm radius of corner curvature, no other size-2 sensor is more rounded.
  • Broader Contact Zone – Where the sensor meets soft tissue, the flatter the better. So the corners are subtly beveled to broaden the contact zone. And our tests with PIP bear out that the pressure on the soft tissues is more evenly distributed.
  • Sensor Sizes – Sometimes anatomy wins, and a rigid size-2 sensor just can’t get close enough to the lingual side of the anteriors, nor follow the curvature of the anterior arch form. A narrower size-1 sensor gets the proper anterior PA. And when a smaller mouth walks through the door, the size-1 handles it.
  • Girth – Why insert something bulky? This tapered sensor thins to 5mm, and no sensor’s cord attachment “button” is smaller.


  • USB – From sensor plate to computer, this direct USB interface needs no box or in-cable electronics. And its more manageable 2-meter cord can be extended with off-the-shelf hubs.
  • Thin – The Clio Sensor is one of the thinnest sensors on the market which is tapers to 5.5mm
  • Immersibility – What if the barrier tears? Sometimes there’s no substitute for cold sterilization in glutaraldehyde. Or maybe you just want to rinse the sensor under the tap.


  • Kevlar – Yes, the same Kevlar that’s used in bullet proof vests gives the cord surprising tensile strength. This cord has never come apart from the attached sensor plate.
  • Hermetic Seal – No fluids, no contaminants, not even air gets into this sensor plate.
  • Thin Cord – Because it needs only four signal wires along its entire length, the cord can be thinner, decreasing the likelihood of being bitten.
  • Sturdier Cord Sheath – Because the cord is so thin, its sheath and be thicker and stronger, decreasing the likelihood of damage even when bitten.
  • Repair Option – Was the cord damaged? Cord replacement is an inexpensive option to replacing the entire sensor.

Clio Sensor Software Compatibility Videos

Clio With Eaglesoft Imaging Clio With Dexis Clio With VixWin Clio With XrayVision

For more Details on the Clio Dental Sensors. Please give our office a call at (800) 869-0915

Dimensions 42.80 x 30.49 x 5.0 mm
Clio Dental Sensor Sizes

Clio Dental Sensor – Size #1, Clio Dental Sensor – Size #2


There are no reviews yet.

Be the first to review “Clio Dental Sensor w/ DI Technology”